ECI Logo1
Visit Us On Facebook!
Sign Up For Our Newsletter!

Edison Coatings, Inc. Products are manufactured in the USA from US and foreign components.
E-NHL 2, E-NHL 3.5 White and E-NHL 5.0 are Products of France. BioLime NHL 3.5 Buff is a product of Italy. Marfil is a Product of Spain. SILAN-TREAT 88C is produced in Germany.

Project Spotlight:



A highly successful exterior restoration was completed in 2001 at the Cathedral Basilica of the Assumption, Covington, Kentucky.

A variety of Edison Coatings products were used, including a Custom System 45 Limestone patch #191D-LC, Custom System 45 Terra Cotta patch #108-TC, a custom Spec Joint 46 lime-based repointing mortar, and a custom matched Elastowall 351 breathable elastomeric coating.

Work was completed by Trisco Systems, Inc. of Lima, Ohio, a full-service restoration contractor with dozens of certified Edison mechanics and an Edison Coatings installer for over 15 years. The Trisco team was led by Brian Walter, Bob Vollmer and Pete Runyon.

KZF Design, Inc. of Cincinnati prepared specifictions, elaborate photo-documents and drawings for the project. The Design Project Team was led by Michael Smith, Project Manager and Charlie Kemp, Project Architect.

 3 Northwest Drive, Plainville, CT 06062 USA

Phone: (860) 747-2220 or (800) 341-6621

FAX: (860) 747-2280 or (866) 658-1189

E-Mail: Contact Us


Last Updated:

Tuesday, March 29, 2022

Society for the Preservation of Historic Cements, Inc.


Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. All product sales are further governed by the Edison Coatings, Inc. CONDITIONS OF SALE. Privacy Policy.

Copyright 2016, Edison Coatings, Inc. All rights reserved.