Ruregold

RUREGOLD FRCM

FIBER REINFORCED CEMENT MATRIX PLASTER

Description:

Ruregold FRCM is a structural strengthening system with bi-directional carbon mesh and stabilized inorganic matrix for masonry constructions. The increased weight of carbon makes it suitable for applications on masonry such as wraps or shear or bending reinforcements. This strengthening system does NOT use epoxy resins and its performance equals that of traditional FRPs with carbon fibers and epoxy binder.

*Ruregold products are structural strengthening systems for concrete and masonry that require design and oversight by a licensed professional engineer. Referrals for third party independent engineering services with expertise in FRCM design are available upon request.




		*MASONRY* Ruregold C-MESH Flyer MX-C 25 MASONRY Technical Data Sheet -MX-C 25 Masonry stabilized inorganic matrix specific for applications on masonry (in compliance with EN 998-2 Standard). C-MESH 84/84 Technical Data Sheet -C-MESH 84/84 bi-directional carbon mesh for FRCM strengthening system. MX-JOINT Technical Data Sheet -MX-JOINT stabilized inorganic matrix for the application of C-JOINT. C-JOINT Technical Data Sheet -C-JOINT connection system made of unidirectional carbon fibers for the creation of an anchor between the existing structures and FRCM carbon structural strengthening systems.




	*CONCRETE* Ruregold PBO-MESH Flyer MX-PBO CONCRETE Technical Data Sheet -MX-PBO Concrete stabilized inorganic matrix specific for applications on concrete. PBO-MESH 70/18 Technical Data Sheet -PBO-MESH 70/18 bi-directional PBO mesh for FRCM strengthening system. MX-JOINT Technical Data Sheet -MX-JOINT stabilized inorganic matrix for the application of PBO-JOINT. PBO-JOINT Technical Data Sheet -PBO-JOINT connection system made of unidirectional PBO fibers for the creation of an anchor between the existing structures and PBO FRCM structural strengthening systems.

ADDITIONAL RESOURCES

ICC-ES Evaluation Report

Solution Manual

International Reference Projects



Edison Coatings, Inc. Products are manufactured in the USA from US and foreign components. E-NHL 2, E-NHL 3.5 White and E-NHL 5.0 are Products of France. E-NHL 3.5 Buff and Ruregold are Products of Italy. Marfil is a Product of Spain.

3 Northwest Drive, Plainville, CT 06062 USA

Phone: (860) 747-2220 or (800) 341-6621

FAX: (860) 747-2280 or (866) 658-1189

E-Mail: Contact Us


	EDISON COATINGS PRODUCTS ARE FOR COMMERCIAL & INDUSTRIAL USE ONLY

		Last Updated: Monday, February 5, 2024


	Society for the Preservation of Historic Cements, Inc.

LIMITS OF LIABILITY

Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. All product sales are further governed by the Edison Coatings, Inc. CONDITIONS OF SALE. Privacy Policy.