ECI Logo1
Visit Us On Facebook!
Sign Up For Our Newsletter!

FLEXI-BOND 540

100% SOLIDS EPOXY ADHESIVE FOR BONDING NEW CONCRETE TO OLD

DESCRIPTION:

FLEXI-BOND 540 is a two component, 100% solids, moisture-insensitive epoxy bonding agent. Application of FLEXI-BOND 540 to wet or dry, properly prepared substrates assures tenacious adhesion of new toppings, patching compounds and tile bedding mortars when used in accordance with instructions. It may also be applied to steel, tile, wood and fiberglass.

SUGGESTED USES:

  • As a combination waterproof barrier and bonding agent when applying new concrete toppings over old concrete.
  • To improve adhesion of tile bedding mortars to existing concrete, or may be used directly for tile bedding in combination with very fine sand.
  • To prime and waterproof steel reinforcement prior t application of patching compounds or concrete pouring while improving adhesion of these materials.
  • To penetrate and consolidate low strength floors, such as asbestos-cement or cinder concrete, and to improve adhesion of new toppings or patching compounds to same.
  • To promote adhesion of concrete, bedding mortars or toppings to non-cementitious substrate, such as tile, plywood decking, or steel plate.

Flexi-Bond 540 Data Sheet

Flexi-Bond 540 SDS: PART A, PART B

 

Edison Coatings, Inc. Products are manufactured in the USA from US and foreign components.
E-NHL 3.5 Buff is a Product of Italy.   E-NHL 2, E-NHL 3.5 White and         E-NHL 5.0 are Products of France. Marfil is a Product of Spain. SILAN-TREAT 88C is produced in Germany.

 3 Northwest Drive, Plainville, CT 06062 USA

Phone: (860) 747-2220 or (800) 341-6621

FAX: (860) 747-2280 or (866) 658-1189

E-Mail: Contact Us

EDISON COATINGS PRODUCTS ARE FOR COMMERCIAL & INDUSTRIAL USE ONLY

Last Updated:

Wednesday, October 13, 2021

Society for the Preservation of Historic Cements, Inc.

LIMITS OF LIABILITY

Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. All product sales are further governed by the Edison Coatings, Inc. CONDITIONS OF SALE. Privacy Policy.

Copyright 2016, Edison Coatings, Inc. All rights reserved.