Edison Coatings can be reached from Interstate 84 East Exit 34 or I-84 West Exit 33.
If traveling East (towards Hartford) turn left at the end of the Exit 34
ramp. Go 1 block to end and turn left on Rt. 372 West. Turn right at 5th traffic light (Citgo Station) onto Cooke Street. Proceed straight 1 mile to Northwest Drive. Turn left onto Northwest Drive. #3 Northwest is the second building on the right.
If traveling North (from New Haven) take I-91 to Rt. 9 North (towards New Britain). Bear left in New Britain onto Rt. 72 West
(towards Bristol). Continue on Rt. 72 at I-84 junction. Then follow directions, below, taking Exit 33.
If traveling West (towards Waterbury) take Exit 33, Rt. 72, towards Bristol. Bear
right at the exit and take Exit 2, Rt. 372 Plainville. Stay in the second lane from the left ("372 West - Cooke Street") and turn left at the traffic light at the end of the ramp. Take first right
onto Cooke Street. (Citgo Station). Proceed straight 1 mile to Northwest Drive. Turn left onto Northwest Drive. #3 Northwest is the second building on the right.
TRUCKERS - PLEASE BACK IN TO LOADING DOCK FACING STREET; Report to front office.
FLATBEDS - PLEASE BACK IN TO DRIVEWAY ALONGSIDE LOADING DOCK. Report to front office.
Receiving Hours: 9:00 AM to 1:30 PM
Shipping Hours: 2:00 PM to 4:00 PM
Office Hours: Mon - Fri: 8:00 AM to 4:30 PM Sat - Sun: Closed
Edison Coatings, Inc. Products are manufactured in the USA from US and foreign components. E-NHL 2, E-NHL 3.5 White and E-NHL 5.0 are Products of France. BioLime NHL 3.5 Buff is a product of Italy. Marfil is a Product of Spain. SILAN-TREAT 88C is
produced in Germany.
Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This
publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and
information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a
warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages
whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that
he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. All product sales are further governed by
Copyright 2016, Edison Coatings, Inc. All rights reserved.