|
RESTORATION LATEX:
RL-1, RL-2, RL-3, RL-4, RL-5, RL-6, RL-7
DESCRIPTION:
RL-Series latex modifiers
are unique reactive acrylic additives designed to enhance the performance of Portland cement based materials. RL-Series latex admixtures are
acrylic based, non-yellowing, film forming compounds which do not re-emulsify following cure.
When added to cement based mortars, patches, plasters and coatings, RL-Series latex modifiers
improve mechanical performance, workability, adhesion and resistance to harsh environmental exposures including freeze-thaw. They overcome the limitations of conventional acrylic modifiers,
developing and retaining performance even when wet and avoiding surface skinning to extend surface working time.
RL-1
is a general purpose reactive acrylic modifier which combines excellent mechanical properties with superior workability for trowel-applied mortars, patches, coatings and cement plasters. It provides extended working time and positive through-setting at any depth.
RL-2 is a superplasticized modifier for use in casting and coating applications.
RL-3
is a chemical resistant, highly reactive latex grade intended for tough industrial and marine exposures, or where high moisture or immersion services are planned.
RL-4 is a latex modifier which provides high permeability to repair mortars and plasters, for use in applications where extended permeability is
required.
RL-5
is a hot weather modifier which provides extended working times and improved resistance to skinning when working under hot, dry conditions.
RL-6
is a cold weather modifier, incorporating a set accelerator to compensate for cold weather effects on set time and to improve resistance to freezing when working under cold, damp conditions.
RL-7
is a modifier formulated to form a gel when mixed with cementitious mortars, allowing application of deep repairs up to 3" (7.6 cm) in a single lift. It also allows up to 24 hours' sculpting time.
In some cases, hybrids and additional special grades can be produced on a custom basis. For example, An
RL2/3 hybrid would provide both superior chemical resistance and high flow. An RL-4/5
hybrid would provide both high permeability and enhanced hot weather workability. Consult your Edison Coatings Technical Representative for recommendations on special grades.
Restoration Latex Data Sheet
Restoration Latex SDS
|
