Elastomeric Epoxy Deck Coatings and Tank Linings

FLEXI-DECK 500-E

100% SOLIDS ELASTOMERIC EPOXY COATING

Edison FLEXI-DECK 500-E is a 100% solids modified epoxy elastomeric membrane/coating designed for high performance waterproofing, chemical resistance and traffic compatibility under a wide range of application and service conditions.

FLEXI-DECK 500-E features odorless application, "zero" VOC content, low viscosity and self-priming to concrete, steel, aluminum, ceramic tile*, plywood, natural stone, glass*,

vinyl tile and many other substrates. (*Note: Some glassy surfaces require use of adhesion-promoting additives.) Clear or a wide range of colors is available.

Common uses for FLEXI-DECK 500-E include:

PARKING DECK WATERPROOFING MEMBRANES
INDUSTRIAL FLOORING UNDERLAYMENT
MECHANICAL ROOM FLOORING NON-SLIP SURFACING
TANK LINING/SECONDARY CONTAINMENT

Flexi-Deck 500-E Data Sheet

Flexi-Deck 500-E SDS: PART A, PART B



Edison Coatings, Inc. Products are manufactured in the USA from US and foreign components. E-NHL 2, E-NHL 3.5 White and E-NHL 5.0 are Products of France. E-NHL 3.5 Buff and Ruregold are Products of Italy. Marfil is a Product of Spain.

3 Northwest Drive, Plainville, CT 06062 USA

Phone: (860) 747-2220 or (800) 341-6621

FAX: (860) 747-2280 or (866) 658-1189

E-Mail: Contact Us


	EDISON COATINGS PRODUCTS ARE FOR COMMERCIAL & INDUSTRIAL USE ONLY

		Last Updated: Tuesday, September 3, 2024


	Society for the Preservation of Historic Cements, Inc.

LIMITS OF LIABILITY

Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. All product sales are further governed by the Edison Coatings, Inc. CONDITIONS OF SALE. Privacy Policy.