Epoxy Concrete Floor Patching & Topping Compounds

Flexi-Top 550

FLEXI-TOP 550, 555

INDUSTRIAL EPOXY PATCH & TOPPINGS

DESCRIPTION:

FLEXI-TOP 500 & 555 are heavy-duty, 100% solids, odorless epoxy mortars far patching and topping of commercial, institutional and industrial floors.

FLEXI-TOP 550 is a self-leveling surfacing system providing heavy-duty protection at l/8" to 1/4" thickness or more. Blended with select aggregates, it forms a fluid mixture which easily spreads with a V-notched trowel or squeegee. Upon curing, it forms a dense, non-porous flooring that resists chemical and water penetration, dirt pick-up, and heavy traffic. It may be sealed with a number of protective topcoats for improved skid resistance, gloss and color retention.

FLEXI-TOP 555 is a versatile trowel-applied mortar used for patching or toppings of 1/4" or more. Blended with specially graded aggregates, it forms a dry, trowelable mortar that can be applied by hand or power trowel. This mortar is then grouted and sealed with 100% solids resins to eliminate porosity and produce a dense, non-porous, slip-resistant finish.

Flexi-Top 550, 555 Data Sheet

Flexi-Top 550, 555 SDS: PART A, PART B

If you have any questions, please call our support team at 800-341-6621



Edison Coatings, Inc. Products are manufactured in the USA from US and foreign components. E-NHL 2, E-NHL 3.5 White and E-NHL 5.0 are Products of France. E-NHL 3.5 Buff and Ruregold are Products of Italy. Marfil is a Product of Spain.

3 Northwest Drive, Plainville, CT 06062 USA

Phone: (860) 747-2220 or (800) 341-6621

FAX: (860) 747-2280 or (866) 658-1189

E-Mail: Contact Us


	EDISON COATINGS PRODUCTS ARE FOR COMMERCIAL & INDUSTRIAL USE ONLY

		Last Updated: Tuesday, October 22, 2024


	Society for the Preservation of Historic Cements, Inc.

LIMITS OF LIABILITY

Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. All product sales are further governed by the Edison Coatings, Inc. CONDITIONS OF SALE. Privacy Policy.