Latex Modified Concrete Resurfacers - Edison Coatings, Inc.

DeckTop 47

DECK-TOP 47, 47-RC

LATEX-MODIFIED CONCRETE PATCH & RESURFACERS

Description:

DECK-TOP 47 and 47-RC are two-part, latex modified, concrete patching and resurfacing compounds designed for high-performance in thin-section topping applications. DECK-TOP applications of 1/8" to ¼" thickness withstand heavy vehicular traffic, impact and vibration without loss of adhesion or rapid wear.

Recommended Applications:

Resurfacing Scaled Concrete Floors, Decks and Ramps
Repair of Frost or Rain-Damaged Concrete
Repitching Decks and Terraces
Anti-Skid and Non-Slip Toppings
Wear-Resistant Toppings for Curves and Turn Areas

DECK-TOP 47 is a multi-purpose, superplasticized, acrylic latex modified patch/resurfacer.

DECK-TOP 47-RC Rapid Curing formula achieves high structural strengths in just 24 hours, for surfaces which must be reopened quickly to heavy traffic. It also through-cures efficiently in deep patches, due to integral chemical catalyzation.

Deck-Top 47 Data Sheet

Deck-Top 47 SDS

If you have any questions, please call our support team at 800-341-6621



Edison Coatings, Inc. Products are manufactured in the USA from US and foreign components. E-NHL 2, E-NHL 3.5 White and E-NHL 5.0 are Products of France. E-NHL 3.5 Buff and Ruregold are Products of Italy. Marfil is a Product of Spain.

3 Northwest Drive, Plainville, CT 06062 USA

Phone: (860) 747-2220 or (800) 341-6621

FAX: (860) 747-2280 or (866) 658-1189

E-Mail: Contact Us


	EDISON COATINGS PRODUCTS ARE FOR COMMERCIAL & INDUSTRIAL USE ONLY

		Last Updated: Tuesday, October 22, 2024


	Society for the Preservation of Historic Cements, Inc.

LIMITS OF LIABILITY

Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. All product sales are further governed by the Edison Coatings, Inc. CONDITIONS OF SALE. Privacy Policy.