ECI Logo1
Visit Us On Facebook!
Sign Up For Our Newsletter!


Heavy Duty Epoxy Flooring Systems


FLEXI-GARD 500-S is a series of high solids, VOC-Compliant epoxy scalers and coatings designed for heavy duty protection of concrete floors and decks. Three products are included:

FLEXI-GARD 500-S is a 100% solids, low viscosity, odorless modified epoxy coating available in clear or pigmented versions. It offers very good hardness and chemical resistance and is ecommended for general use, particularly in interior applications where solvent vapors and odors cannot be  tolerated. FLEXI-GARD 500-S is USDA accepted for use in incidental food contact areas in Federally inspected meat and poultry packing plants.

FLEXI-GARD 500-S 60 & 90 are solvent reduced epoxy sealers and coatings supplied at 60% and 90% solids respectively. All are formulated for D.O.T. non-flammability and V.O.C. compliance. FLEXI-GARD 500-S 60 & 90 form very hard, high gloss films which resist high traffic and a wide range of chemical exposures. They are available in standard clear or optional pigmented versions.

Flexi-Gard 500-S Data Sheet

Flexi-Gard 500-S SDS: PART A, PART B


Edison Coatings, Inc. Products are manufactured in the USA from US and foreign components.
E-NHL 2, E-NHL 3.5 White and E-NHL 5.0 are Products of France.
E-NHL 3.5 Buff and Ruregold are Products of Italy. Marfil is a Product of Spain.

 3 Northwest Drive, Plainville, CT 06062 USA

Phone: (860) 747-2220 or (800) 341-6621

FAX: (860) 747-2280 or (866) 658-1189

E-Mail: Contact Us


Last Updated:

Wednesday, June 5, 2024

Society for the Preservation of Historic Cements, Inc.


Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. All product sales are further governed by the Edison Coatings, Inc. CONDITIONS OF SALE. Privacy Policy.

Copyright 2016, Edison Coatings, Inc. All rights reserved.