COATINGS FOR MASONRY AND CONCRETE
RL-Series Restoration Latexes RL-1, RL-2, RL-3, RL-4, RL-5, RL-6, RL-7
latex-modifiers are unique, reactive acrylic additives designed to enhance the performance of Portland cement-based materials. When added to cement-based mortars, patches, plasters and coatings, RL-Series latex
modifiers improve mechanical performance, workability, adhesion and resistance to freeze-thaw and harsh environmental exposures.
TRANSLANTIC & ROSENDALE NATURAL CEMENT PRODUCTS®
Natural cement was the binder of choice in North America for large scale masonry and concrete construction during the 19th and early 20th
century. Now this authentic technology is back in production and is available exclusively from Edison Coatings, Inc. Visit our new web site dedicated to Rosendale Natural Cement Products® to learn more about Rosendale Natural Cements, Rosendale Natural Cement Masonry Mortars,
Rosendale Natural Cement Stucco, and more.
Rosendale & Translantic 14S Stucco
Rosendale 15W Whitewash
Spray Blok 40 is a strippable / sacrificial coating for use as a
sacrificial anti-graffiti treatment, liquid masking agent or temporary, removable coating. It is characterized by high solvent resistance and ready redispersion in hot water. It is available in translucent and
EXPO 43 Polymer-Modified, Cement-Based Coating
is a polymer-modified cement-based coating designed for use in thin-section decoration, texturing and weatherproofing applications. This material provides aesthetically pleasing surfaces for building finishes, masonry coating, stucco and patching.
Custom SYSTEM 45 Custom-Matched Repair & Coating Compounds
Edison Custom SYSTEM 45 products are two-component, latex-modified, cementitious compounds used to produce highly durable and compatible aesthetic repairs to stucco, stone, masonry and concrete.
DECK-TOP 47, 47-RC Thin Resurfacers for Concrete Floors and Decks (Regular & Rapid-Cure Formulas)
DECK-TOP 47 and 47-RC
are two-part, latex modified, concrete patching and resurfacing compounds designed for high-performance in thin-section topping applications. DECK-TOP
applications of 1/8" to ¼" thickness withstand heavy vehicular traffic, impact and vibration without loss of adhesion or rapid wear.
SYSTEM 49 CPBA Corrosion Resistant Primer and Bonding Agent for Embedded Reinforcing Steel
is a two-component, latex-cement primer and bonding agent designed to protect steel reinforcement from corrosion while promoting adhesion between patching compounds and concrete and steel substrates. It is an odorless, non-flammable, waterborne system which is essentially non-hazardous in storage and handling.
LEVEL-X52, Self-Leveling, Self-Smoothing Polymer
Modified Floor Topping
LEVEL-X 52 is a one part, cement-based, polymer modified floor topping and leveling compound designed to provide
smooth and level interior or exterior floors and decks with a minimum of time and labor. LEVEL-X 52
can be used to prepare a wide variety of sub-floors for installation of tile, carpet, resilient flooring, wood flooring and many types of surface coatings. It may also be left exposed as a final finish in light industrial or commercial environments.
LEVEL-X 52 also provides rapid, economical casting, repair and leveling in exterior exposures and in wet environments. It readily accepts a variety of
finishes, or may be left exposed to traffic and weather
Cem-Plast 54 Custom Cement Plasters
is a series of pre-colored, prepackaged cement plasters for use in new construction and restoration. They are formulated in accordance with ASTM C 926 specifications to provide consistent, reliable results in both performance and appearance.
THIN-FILL 55 Masonry & Concrete Thin-Section Reprofiling Mortar
55 is a latex-modified reprofiling mortar for application of thin-section patches of 1/32 to 1/4 inch depth while maintaining excellent adhesion, strength, breathability and resistance to
cracking.THIN-FILL 55 provides smooth finishes which can also be further polished to repair glazed terra cotta or polished stone profiles.
SILOX-TREAT 89W, 89WH
Waterborne, reactive silane-siloxane water repellents reduce water absorption in porous substrates
without affecting permeability or appearance.
SYSTEM 90-II, 90-W Catalytic Breathing Sealers & Stains
Edison SYSTEM 90-Series
sealers are reactive treatments designed for maximum performance and exterior durability in protection of on-grade and above-grade stone, concrete and masonry. Surfaces treated with SYSTEM 90
products are sealed against a wide range of chemical and weather exposures, including acid rain, melting snow, freeze-thaw, de-icing salts, air pollutants, wind driven rain and a variety of other materials.Pigmented treatments combine all the performance of 90-Series
sealers with the aesthetic benefits of a durable semi-transparent stain.
LiquiDirt 94 Sealer, Stain & Faux Finish
is a durable, high-permeability stain and faux finishing treatment designed for application to on-grade and above-grade stone, masonry, mortars, stucco and concrete. It is used for"aging" of new masonry replacements or repairs, to change color of new or existing masonry units, or to overcome fading or staining in original materials.
SYSTEM 95W Stone, Masonry and Concrete Consolidants
Waterborne silicate consolidants strengthen friable stone, stucco and concrete.
AQRYL-X 200 Low VOC, Self-Crosslinking, 100% Acrylic Emulsion Coating
is a high performance, very-low VOC coating designed to provide exceptional water-resistance, vapor permeability and maximum durability. AQRYL-X 200 develops high bond strength to a wide variety of substrates under dry and damp conditions, and retains high performance even after extended moisture exposures.
AQUATHANE UA-210 Types E, F, NCL and H-A/G Waterborne Polyurethane Coatings
EDISON AQUATHANE UA-210
products are multi-purpose, high-performance, waterborne polyurethane- based coatings which can be applied to natural stone. They are breathing, low in odor, VOC-Compliant, fast drying, reactive, single component products. Cured films are tough, flexible, and resistant to abrasion and intermittent exposure to water and many chemicals.
AQUASPEX 220 Multi-Colored Special Effects Coatings
AQUA-SPEX 220 is a specialty coating system designed to provide multi-color finishes in a single, simple application. They are based on clear, high-performance,
highly durable, water-borne polyurethane coatings into which color specks of varying sizes and colors have been dispersed. The coating can be used to simulate multi-colored granite and marble.
PRIMER 240 for Aquathane UA210
Waterborne, vapor-permeable primer promotes adhesion to smooth, non-porous, glazed, previously coated and other hard-to-bond surfaces.
PRIMER 241 for tinted Aquathane UA210E and UA210EE
is a Reactive, UV-stable, water-resistant, self-crosslinking, vapor permeable 100% acrylic emulsion primer.
AQUEPOXY 250 Waterborne Immersion-Grade Epoxy
High-gloss, chemical and water-resistant waterborne epoxy coating for floors, walls, machinery surfaces. Suitable for continuous water immersion after cure, may be applied to damp or "green" concrete
EVERKOTE 300 Mineral Coatings & Stains
coatings are waterborne inorganic paints and stains based on potassium silicate binders. Potassium silicate masonry paints have been in use for over a century to provide extremely durable, breathable color coatings on all types of mineralbased substrates, including stone, masonry, concrete and cement plaster (stucco).Two standard grades of are available:
Penetral Low Viscosity, SemiTransparent Stains and Patinar Medium Viscosity, Opaque Coatings
PRIMER #342 for waterborne coatings.
is a low viscosity, vapor permeable acrylic emulsion primer. It is used for penetrating and conditioning porous or friable surfaces prior to coating with Elastowall 351 breathable masonry coatings.
It has also been used as a pre-treatment for aiding in the drying out of deeply saturated, thick section concrete and masonry structures.
ELASTO-WALL 351, ELASTO-TONE 353 Breathable Elastomeric Coatings,
ELASTO-MASTIC 352, ELASTO-FILL 354 Elastomeric
Sealants and Fillers
ELASTO WALL 351
is a permanently flexible breathable masonry coating designed to waterproof and decorate vertical and sloped above-grade surfaces, including all types of natural stone, and including walls exhibiting small working cracks. It has higher vapor permeability than some mineral coating products, and can be applied over a wide variety of previous coatings and treatments.
ELASTO MASTIC 352 is a knife-grade, higher solids formulation designed for pretreatment of surface defects and
cracks prior to general coating application. Depressions and defects are simply "spackled", and then a 350-Series coating
is applied after drying.
ELASTO-TONE 353 is a highly permeable finish system for economical color coatings and
"touch-up" applications. Based on the same chemistry as ELASTO WALL 351, it features high elongation and low temperature flexibility, while
offering greater economy, due to lower build and higher application rate.
ELASTO-FILL 354 is a higher solids, lightweight version of ELASTO-MASTIC 352. It is used where higher builds of filler are desired, with lower shrinkage.
FLEXI-DECK 500-E Modified Epoxy Flex-Coat
Low viscosity, odorless, 100% solids, self-priming flexible epoxy coating. Used as elastomeric primer for rigid epoxies, as flexible hardcoat over 500-U membranes, or for
mechanical room and industrial floor membranes.
FLEXI-DECK 500-L Oil-Tolerant 100% Solids Primer
Low viscosity, flexible, odorless primer, bonds to ceramic and vinyl tile, wood, smooth concrete, oil-contaminated concrete and metal, many previous epoxy coatings.
FLEXI-GARD 500-N Novolac Epoxy Coatings
FLEXI-GARD 500-N-FLX Flexibilized Novolac Epoxy
is a 100% solids, odorless, VOC-Compliant epoxy coating system designed for maximum resistance to chemical spillage and immersion, heavy industrial traffic and elevated temperatures.
FLEXI-GARD 500-S Low Viscosity Epoxy Coatings
100% solids, odorless, USDA-accepted clear or colored floor coatings Also available in 90% solids (500S-90) for easy handling and low cost. Withstands a wide range of chemical exposures.
FLEXI-BOND 540 Epoxy Bonding Agent (New Concrete to Old Concrete)
540 is a two component, 100% solids, moisture-insensitive epoxy bonding agent. Application of FLEXI-BOND 540
to wet or dry, properly prepared substrates assures tenacious adhesion of new toppings, patching compounds and tile bedding mortars when used in accordance with instructions. It may also be applied to steel, tile, wood and fiberglass. It can be used as a
combination waterproof barrier and bonding agent when applying new concrete toppings over old concrete. It can be used to improve adhesion of tile bedding mortars
to existing concrete, or may be used directly for tile bedding in combination with very fine sand. It can be used to prime and waterproof steel reinforcement
prior t application of patching compounds or concrete pouring while improving adhesion of these materials. It can be used to penetrate and consolidate low strength floors
, such as asbestos-cement or cinder concrete, and to improve adhesion of new toppings or patching compounds to same. It can be used to promote adhesion
of concrete, bedding mortars or toppings to non-cementitious substrate, such as tile, plywood decking, or steel plate.
is a 100% solids, medium viscosity, moisture insensitive epoxy coating intended for heavy marine and wet industrial exposures. Marine-FLEX 570 CAN BE APPLIED UNDERWATER
, as well as on wet, damp or dry concrete or steel surfaces of exposed to air.
FLASHEPOXY 580-Series Ultra-Fast & Low Temperature Adhesives /
Acrylate-Epoxies are 100% solids,
low odor/toxicity, mercaptan-free formulation permits coating and patching down to -220F, for winter, refrigerator, freezer and fast-cure applications. Moisture tolerant, non-flammable, "0" VOC,
Back To Top