|
STONE PATCHING AND RESTORATION PRODUCTS
RL-Series Restoration Latexes RL-1, RL-2, RL-3, RL-4, RL-5, RL-6
RL-Series
latex modifiers are unique reactive acrylic additives designed to enhance the performance of Portland cement based materials. When added to Portland cement based mortars, patches, plasters and coatings, RL-Series
latex modifiers improve mechanical performance, workability, adhesion and resistance to harsh environmental exposures.
Rosendale Natural Cement Products, 10-14
Natural cement was the binder of choice in North America for large scale masonry and concrete construction during the 19th and early 20th century. Now this authentic technology is back in production and
is available exclusively from Edison Coatings, Inc. Visit our new web site dedicated to Rosendale Natural Cement to learn more about Rosendale Natural Cements, Rosendale Natural Cement Masonry Mortars, Rosendale
Natural Cement Stucco, and more: www.rosendalecement.net
EXPO 43 Latex-Modified, Cement-Based Coating
EXPO 43
is a latex-modified cement-based coating designed for use in thin-section decoration, texturing and weatherproofing applications. This material provides aesthetically pleasing surfaces for building finishes, masonry coating, stucco and patching.
Custom SYSTEM 45 Masonry Repair & Coating Compounds
Edison
Custom SYSTEM 45 products are two-component, latex-modified, cementitious compounds used to produce highly durable and compatible aesthetic repairs to masonry and concrete.
SPEC-JOINT 46 Custom Masonry Repointing Mortar
SPEC-JOINT 46
is a series of pre-colored, prepackaged, lime and cement-lime mortars for use in new construction and restoration. Lime mortar is formulated to match traditional historic mortars, and cement-lime mortars are formulated in accordance with ASTM C-270 specifications to provide consistent, reliable results in both performance and appearance.
SPEC-JOINT 46 is simply mixed with water prior to use, and is applied in accordance with Standard Procedures for use of masonry mortar.
SYSTEM 49 CPBA Corrosion Resistant Primer and Bonding Agent for Embedded Reinforcing Steel
SYSTEM 49-CPBA
is a two-component, latex-cement primer and bonding agent designed to protect steel reinforcement from corrosion while promoting adhesion between patching compounds and concrete and steel substrates.
PUMP-X 53, 53i, 53iE, 53iL Pumpable Cementitious Grouts
PUMP-X53 is a multi-purpose, low modulus, moderate strength filler used for filling cavities, voids and cracks from a minimum of ¼" width up to approximately 18 inches.
PUMP-X53i is an ultra-fine, moderate strength micro-injection grout which achieves high flow for efficient filling of small cracks and voids from a minimum width of
approximately 1 mm to as much as several inches in thickness.
Pump-X 53iE
is an ultra-fine, expanding, non-polymer cementitious injection grout designed for filling small cracks and voids in sound concrete and masonry construction. Slight expansion after placement and before final set enables the material to force itself into close, positive contact with internal crack surfaces, where desired.
PUMP-X-53iL
is a softer, non-polymer, hydraulic lime grout, for use in Historic masonry restorations requiring repairs to lower strength brick and softer stone elements.
THIN-FILL 55 Masonry & Concrete Thin-Section Reprofiling Mortar
THIN-FILL 55 is a
latex-modified reprofiling mortar for application of thin-section patches of 1/32 to 1/4 inch depth while maintaining excellent adhesion, strength, breathability and resistance to cracking.THIN-FILL 55
provides smooth finishes which can also be further polished to repair glazed terra cotta or polished stone profiles.
SILOX-TREAT 89W, WH
Waterborne, reactive silane-siloxane water repellents reduce water absorption in porous substrates without affecting
permeability or appearance.
SYSTEM 90-II, 90-W Catalytic Breathing Sealers & Stains
Edison SYSTEM 90-Series
sealers are reactive treatments designed for maximum performance and exterior durability in protection of on-grade and above-grade stone, concrete and masonry. Surfaces treated with SYSTEM 90
products are sealed against a wide range of chemical and weather exposures, including acid rain, melting snow, freeze-thaw, de-icing salts, air pollutants, wind driven rain and a variety of other materials.Pigmented treatments combine all the performance of 90-Series sealers with the aesthetic benefits of a durable semi-transparent stain.
LiquiDirt 94 Sealer, Stain & Faux Finish
LiquiDirt 94
is a durable, high-permeability stain and faux finishing treatment designed for application to on-grade and above-grade stone, masonry, mortars, stucco and concrete. It is used for"aging" of new masonry replacements or repairs, to change color of new or existing masonry units, or to overcome fading or staining in original materials.
SYSTEM 95 Stone, Masonry and Concrete Consolidants
Penetrating ethyl silicate adhesive consolidants strengthen friable stone, stucco and concrete.
AQUATHANE UA-210 Types E, F, NCL and H-A/G Waterborne Polyurethane Coatings
EDISON AQUATHANE UA-210
products are multi-purpose, high-performance, waterborne polyurethane- based coatings which can be applied to natural stone. They are breathing, low in odor, VOC-Compliant, fast drying, reactive, single component products. Cured films are tough, flexible, and resistant to abrasion and intermittent exposure to water and many chemicals.
AQUASPEX 220 Multi-Colored Special Effects Coatings
AQUA-SPEX 220 is a specialty coating system
designed to provide multi-color finishes in a single, simple application. They are based on clear, high-performance, highly durable, water-borne polyurethane coatings into which color specks of varying sizes and
colors have been dispersed. The coating can be used to simulate multi-colored granite and marble.
EVERKOTE 300 Mineral Coatings & Stains
EverKote 300
coatings are waterborne inorganic paints and stains based on potassium silicate binders. Potassium silicate masonry paints have been in use for over a century to provide extremely durable, breathable color coatings on all types of mineralbased substrates, including stone, masonry, concrete and cement plaster (stucco).Two standard grades of are available:
Penetral Low Viscosity, SemiTransparent Stains and Patinar Medium Viscosity, Opaque Coatings
PRIMER #342 for waterborne coatings.
Primer 342
is a low viscosity, vapor permeable acrylic emulsion primer. It is used for penetrating and conditioning porous or friable surfaces prior to coating with Elastowall 351 breathable masonry coatings.
It has also been used as a pre-treatment for aiding in the drying out of deeply saturated, thick section concrete and masonry structures.
ELASTO-WALL 351 and ELASTO-TONE 353 Breathable Elastomeric Masonry Coatings
ELASTO WALL 351
is a permanently flexible breathable masonry coating designed to waterproof and decorate vertical and sloped above-grade surfaces, including all types of natural stone, and including walls exhibiting small working cracks. It has higher vapor permeability than some mineral coating products, and can be applied over a wide variety of previous coatings and treatments.
ELASTO-TONE 353 is a highly permeable finish system for economical color coatings and "touch-up" applications. Based on the same chemistry as ELASTO WALL 351, it features high elongation and low temperature flexibility, while offering greater economy, due to lower build and higher application rate.
FLEXI-SEAL 510, 510-U Flexible Epoxy Crack Filler
FLEXI-SEAL 510 & 510-U
are two-component, highly flexible 100% solids epoxies. They are designed to fill, bridge and seal small "working" cracks in stone, concrete, and masonry. They are particularly useful
for sealing and waterproofing cracks up to 1/8" wide such as settling cracks, flexural (negative moment) cracks and construction joints.
FLEXI-WELD 520, 520T Epoxy Adhesives
FLEXI-WELD 520 and 520-T
are two-component, moisture insensitive, high strength 100% solids epoxy adhesives for general purpose bonding to a wide variety of substrates, including stone, masonry and dry or damp concrete.
FLEXI-FILL 530 Epoxy Filler
FLEXI-FILL 530
is a unique two-component, slightly flexibilized 100% solids epoxy-acrylate-isocyanate terpolymer adhesive for surface-sealing cracks and filling small depressions in a wide variety of substrates. Suitable substrates include terra cotta, concrete, masonry and stone.
FLEXI-FILL 530
is a paste adhesive, which should be used neat or mixed with coarse fillers and tooled onto bonding surfaces. Although it is packaged in premeasured "A" (Resin) and "B" (Hardener) components, the mix ratio is far less critical than for traditional 2-part epoxy formulations. This allows the user to adjust working consistency at different temperatures. This variable ratio feature makes
FLEXI-FILL 530 a true "all season" epoxy adhesive and sealant.
Back To Top
|
