ECI Logo1
Visit Us On Facebook!
Sign Up For Our Newsletter!
NYU Silver Towers

NYU Silver Towers in NYC restored using Custom 45-Concrete


The following is a link list of products commonly used for concrete restoration.

Guide Specification: Section 4415 Aesthetic Exterior Concrete Wall Repair

RL-Series Restoration Latexes RL-1, RL-2, RL-3, RL-4, RL-5, RL-6, RL-7
RL-Series latex-modifiers are unique, reactive acrylic additives designed to enhance the performance of Portland cement-based materials. When added to cement-based mortars, patches, plasters and coatings, RL-Series latex modifiers improve mechanical performance, workability, adhesion and resistance to freeze-thaw and harsh environmental exposures.

REPLIC-8 Historic Concrete Replication Mixes
Custom-matched aggregates, matrix and mix design provide matching replacement concrete mixes for large-scale repairs/replacement.

ICE -9 (RL-9) Freeze-Thaw Performance Amendment
Ice -9 (RL-9) is an additive for mortars, stuccos and concrete that improves freeze-thaw resistance even in the presence of ponded deicing salts. It also improves bond strength and reduces shrinkage.

Natural cement was the binder of choice in North America for large scale masonry and concrete construction during the 19th and early 20th century. Now this authentic technology is back in production and is available exclusively from Edison Coatings, Inc. Visit our new web site dedicated to Rosendale Natural Cement Products® to learn more about Rosendale Natural Cements, Rosendale Natural Cement Masonry Mortars, Rosendale Natural Cement Stucco, and more.
Rosendale 10C Natural Cement
Rosendale 11Gi, 11G Injection Grouts
Rosendale 12M Masonry Mortars
Rosendale 13P Patching Compounds
Rosendale 14S Stucco
Rosendale 15W Whitewash
Rosendale 16B Beton (Concrete)

EXPO 43 Polymer-Modified, Cement-Based Coating
is a polymer-modified cement-based coating designed for use in thin-section decoration, texturing and weatherproofing applications. This material provides aesthetically pleasing surfaces for building finishes, masonry coating, stucco and patching.

System 44 Concrete Repair Mortars
Edison SYSTEM 44-Series patching compounds are one-component, cement-based mortars designed for effective and economical repairs to all types of concrete structures. The series includes a wide range of formulations, each engineered for maximum performance and workability under a particular set of service and application conditions.

Custom SYSTEM 45 Custom-Matched Repair & Coating Compounds
Edison Custom SYSTEM 45 products are two-component, latex-modified, cementitious compounds used to produce highly durable and compatible aesthetic repairs to stucco, stone, masonry and concrete.

DECK-TOP 47, 47-RC Thin Resurfacers for Concrete Floors and Decks (Regular & Rapid-Cure Formulas)
and 47-RC are two-part, latex modified, concrete patching and resurfacing compounds designed for high-performance in thin-section topping applications. DECK-TOP applications of 1/8" to " thickness withstand heavy vehicular traffic, impact and vibration without loss of adhesion or rapid wear.

SYSTEM 49 CPBA Corrosion Resistant Primer and Bonding Agent for Embedded Reinforcing Steel
is a two-component, latex-cement primer and bonding agent designed to protect steel reinforcement from corrosion while promoting adhesion between patching compounds and concrete and steel substrates. It is an odorless, non-flammable, waterborne system which is essentially non-hazardous in storage and handling.

LEVEL-X52, Self-Leveling, Self-Smoothing Polymer Modified Floor Topping
is a one part, cement-based, polymer modified floor topping and leveling compound designed to provide smooth and level interior or exterior floors and decks with a minimum of time and labor. LEVEL-X 52 can be used to prepare a wide variety of sub-floors for installation of tile, carpet, resilient flooring, wood flooring and many types of surface coatings. It may also be left exposed as a final finish in light industrial or commercial environments. LEVEL-X 52 also provides rapid, economical casting, repair and leveling in exterior exposures and in wet environments. It readily accepts a variety of finishes, or may be left exposed to traffic and weather

PUMP-X 53, 53i, 53iE, 53iL Pumpable Cementitious Grouts
is a multi-purpose, low modulus, moderate strength filler used for filling cavities, voids and cracks from a minimum of " width up to approximately 18 inches.
PUMP-X53i is an ultra-fine, moderate strength micro-injection grout which achieves high flow for efficient filling of small cracks and voids from a minimum width of approximately 1 mm to as much as several inches in thickness.
Pump-X 53iE is an ultra-fine, expanding,  non-polymer cementitious injection grout designed for filling small cracks and voids in sound concrete and masonry construction. Slight expansion after placement and before final set enables the material to force itself into close, positive contact with internal crack surfaces, where desired.
PUMP-X-53iL is a softer, non-polymer, hydraulic lime grout, for use in Historic masonry restorations requiring repairs to lower strength brick and softer stone elements.

Cem-Plast 54 Custom Cement Plasters
CEM-PLAST 54 is a series of pre-colored, prepackaged cement plasters for use in new construction and restoration. They are formulated in accordance with ASTM C 926 specifications to provide consistent, reliable results in both performance and appearance.

THIN-FILL 55 Masonry & Concrete Thin-Section Reprofiling Mortar
is a latex-modified reprofiling mortar for application of thin-section patches of 1/32 to 1/4 inch depth while maintaining excellent adhesion, strength, breathability and resistance to cracking.THIN-FILL 55 provides smooth finishes which can also be further polished to repair glazed terra cotta or polished stone profiles.

Waterborne, reactive silane-siloxane water repellents reduce water absorption in porous substrates without affecting permeability or appearance.

SYSTEM 90-II, 90-W Catalytic Breathing Sealers & Stains
Edison SYSTEM 90-Series sealers are reactive treatments designed for maximum performance and exterior durability in protection of on-grade and above-grade stone, concrete and masonry. Surfaces treated with SYSTEM 90 products are sealed against a wide range of chemical and weather exposures, including acid rain, melting snow, freeze-thaw, de-icing salts, air pollutants, wind driven rain and a variety of other materials.Pigmented treatments combine all the performance of 90-Series sealers with the aesthetic benefits of a durable semi-transparent stain.

LiquiDirt 94 Sealer, Stain & Faux Finish
LiquiDirt 94 is a durable, high-permeability stain and faux finishing treatment designed for application to on-grade and above-grade stone, masonry, mortars, stucco and concrete. It is used for"aging" of new masonry replacements or repairs, to change color of new or existing masonry units, or to overcome fading or staining in original materials.

SYSTEM 95W Stone, Masonry and Concrete Consolidants
Waterborne silicate consolidants strengthen friable stone, stucco and concrete.

AQRYL-X 200 Low VOC, Self-Crosslinking, 100% Acrylic Emulsion Coating
AQRYL-X 200 is a high performance, very-low VOC coating designed to provide exceptional water-resistance, vapor permeability and maximum durability.  AQRYL-X 200 develops high bond strength to a wide variety of substrates under dry and damp conditions, and retains high performance even after extended moisture exposures.

AQUATHANE UA-210 Types E, F, NCL and H-A/G Waterborne Polyurethane Coatings
products are multi-purpose, high-performance, waterborne polyurethane- based coatings which can be applied to natural stone. They are breathing, low in odor, VOC-Compliant, fast drying, reactive, single component products. Cured films are tough, flexible, and resistant to abrasion and intermittent exposure to water and many chemicals.

AQUASPEX 220 Multi-Colored Special Effects Coatings
is a specialty coating system designed to provide multi-color finishes in a single, simple application. They are based on clear, high-performance, highly durable, water-borne polyurethane coatings into which color specks of varying sizes and colors have been dispersed. The coating can be used to simulate multi-colored granite and marble.

SIL-QUATHANE 222 Waterborne Silicone/Polyurethane Coating
SIL-QUATHANE 222 is a water-borne, high-performance silicone/aliphatic polyurethane hybrid elastomeric coating. It combines the extreme water resistance and reduction in water absorption rate of high-performance silicone elastomer with the abrasion, chemical, and weather resistances of aliphatic polyurethane.

PRIMER 240 for Aquathane UA210
Waterborne, vapor-permeable primer promotes adhesion to smooth, non-porous, glazed, previously coated and other hard-to-bond surfaces.

PRIMER 241 for tinted Aquathane UA210E and UA210EE
Primer 241
is a Reactive, UV-stable, water-resistant, self-crosslinking, vapor permeable 100% acrylic emulsion primer.

AQUEPOXY 250 Waterborne Immersion-Grade Epoxy
High-gloss, chemical and water-resistant waterborne epoxy coating for floors, walls, machinery surfaces. Suitable for continuous water immersion after cure, may be applied to damp or "green" concrete 

EVERKOTE 300 Mineral Coatings & Stains
EverKote 300
coatings are waterborne inorganic paints and stains based on potassium silicate binders. Potassium silicate masonry paints have been in use for over a century to provide extremely durable, breathable color coatings on all types of mineralbased substrates, including stone, masonry, concrete and cement plaster (stucco).Two standard grades of are available: Penetral Low Viscosity, SemiTransparent Stains and Patinar Medium Viscosity, Opaque Coatings

PRIMER #342 for waterborne coatings.
Primer 342
is a low viscosity, vapor permeable acrylic emulsion primer. It is used for penetrating and conditioning porous or friable surfaces prior to coating with Elastowall 351 breathable masonry coatings. It has also been used as a pre-treatment for aiding in the drying out of deeply saturated, thick section concrete and masonry structures.

ELASTO-WALL 351, ELASTO-TONE 353 Breathable Elastomeric Coatings,
ELASTO-MASTIC 352, ELASTO-FILL 354 Elastomeric Sealants and Fillers

ELASTO WALL 351 is a permanently flexible breathable masonry coating designed to waterproof and decorate vertical and sloped above-grade surfaces, including all types of natural stone, and including walls exhibiting small working cracks. It has higher vapor permeability than some mineral coating products, and can be applied over a wide variety of previous coatings and treatments.
ELASTO MASTIC 352 is a knife-grade, higher solids formulation designed for pretreatment of surface defects and cracks prior to general coating application. Depressions and defects are simply "spackled", and then a 350-Series coating is applied after drying.
ELASTO-TONE 353 is a highly permeable finish system for economical color coatings and "touch-up" applications. Based on the same chemistry as ELASTO WALL 351, it features high elongation and low temperature flexibility, while offering greater economy, due to lower build and higher application rate.
ELASTO-FILL 354 is a higher solids, lightweight version of ELASTO-MASTIC 352. It is used where higher builds of filler are desired, with lower shrinkage.

FLEXI-DECK 500-E Modified Epoxy Flex-Coat
Low viscosity, odorless, 100% solids, self-priming flexible epoxy coating. Used as elastomeric primer for rigid epoxies, as flexible hardcoat over 500-U membranes, or for mechanical room and industrial floor membranes.

FLEXI-DECK 500-L Oil-Tolerant 100% Solids Primer
Low viscosity, flexible, odorless primer, bonds to ceramic and vinyl tile, wood, smooth concrete, oil-contaminated concrete and metal, many previous epoxy coatings.

FLEXI-GARD 500-N Novolac Epoxy Coatings
FLEXI-GARD 500-N-FLX Flexibilized Novolac Epoxy

is a 100% solids, odorless, VOC-Compliant epoxy coating system designed for maximum resistance to chemical spillage and immersion, heavy industrial traffic and elevated temperatures.

FLEXI-GARD 500-S Low Viscosity Epoxy Coatings
100% solids, odorless, USDA-accepted clear or colored floor coatings Also available in 90% solids (500S-90) for easy handling and low cost. Withstands a wide range of chemical exposures. 

FLEXI-DECK 500-U Urethane-Epoxy Elastomeric Deck Coating
High elongation permits use as waterproof, crack bridging surface for floors and decks, interior or exterior. Low temperature, fast-curing grade 500-ULT. Permanent flexibility, even at sub-zero (F) temperatures 

FLEXI-SEAL 510, 510-U Flexible Epoxy Crack Fillers
FLEXI-SEAL 510 & 510-U
are two-component, highly flexible 100% solids epoxies. They are designed to fill, bridge and seal small "working" cracks in stone, concrete, and masonry. They are particularly useful for sealing and waterproofing cracks up to 1/8" wide such as settling cracks, flexural (negative moment) cracks and construction joints.

FLEXI-WELD 520, 520T Epoxy Adhesives
FLEXI-WELD 520 and 520-T
are two-component, moisture insensitive, high strength 100% solids epoxy adhesives for general purpose bonding to a wide variety of substrates, including stone, masonry and dry or damp concrete.

FLEXI-FILL 530 Epoxy Filler
is a unique two-component, slightly flexibilized 100% solids epoxy-acrylate-isocyanate terpolymer adhesive for surface-sealing cracks and filling small depressions in a wide variety of substrates. Suitable substrates include terra cotta, concrete, masonry and stone. FLEXI-FILL 530 is a paste adhesive, which should be used neat or mixed with coarse fillers and tooled onto bonding surfaces. Although it is packaged in premeasured "A" (Resin) and "B" (Hardener) components, the mix ratio is far less critical than for traditional 2-part epoxy formulations. This allows the user to adjust working consistency at different temperatures. This variable ratio feature makes FLEXI-FILL 530 a true "all season" epoxy adhesive and sealant.

FLEXI-BOND 540 Epoxy Bonding Agent (New Concrete to Old Concrete)
is a two component, 100% solids, moisture-insensitive epoxy bonding agent. Application of FLEXI-BOND 540 to wet or dry, properly prepared substrates assures tenacious adhesion of new toppings, patching compounds and tile bedding mortars when used in accordance with instructions. It may also be applied to steel, tile, wood and fiberglass. It can be used as a combination waterproof barrier and bonding agent when applying new concrete toppings over old concrete. It can be used to improve adhesion of tile bedding mortars to existing concrete, or may be used directly for tile bedding in combination with very fine sand. It can be used to prime and waterproof steel reinforcement prior t application of patching compounds or concrete pouring while improving adhesion of these materials. It can be used to penetrate and consolidate low strength floors , such as asbestos-cement or cinder concrete, and to improve adhesion of new toppings or patching compounds to same. It can be used to promote adhesion of concrete, bedding mortars or toppings to non-cementitious substrate, such as tile, plywood decking, or steel plate.

FLEXI-MATRIX 545 Epoxy Polymer Concrete  
FLEXI-MATRIX 545 is a two component, 100% solids, moisture-insensitive epoxy used for making high-strength chemical resistant polymer concrete. FLEXI-MATRIX 545 may be used under wet or dry conditions, or even underwater, to provide durable, high-strength toppings, patches, floors, walls or other structural elements, when used in accordance with the instructions. It may be applied over concrete, steel, tile, wood, and fiberglass.

FLEXI- TOP 550 Overlayment and Resurfacing Mortar
FLEXI-TOP 555 Repair Mortar

FLEXI-TOP 500 & 555 are heavy-duty, 100% solids, odorless epoxy mortars far patching and topping of commercial, institutional and industrial floors.
FLEXI-TOP 550 is a self-leveling surfacing system providing heavy-duty protection at l/8" to 1/4" thickness or more. Blended with select aggregates, it forms a fluid mixture which easily spreads with a V-notched trowel or squeegee. Upon curing, it forms a dense, non-porous flooring that resists chemical and water penetration, dirt pick-up, and heavy traffic. It may be sealed with a number  of protective  topcoats  for  improved skid resistance, gloss and color retention.
FLEXI-TOP 555 is a versatile trowel-applied mortar used for patching or toppings of 1/4" or more. Blended with specially graded aggregates, it forms a dry, trowelable mortar that can be applied by hand or power trowel. This mortar is then grouted and sealed with 100% solids resins to eliminate porosity and produce a dense, non-porous, slip-resistant finish.

FLASHEPOXY 580-Series Ultra-Fast & Low Temperature Adhesives / Acrylate-Epoxies are 100% solids, low odor/toxicity, mercaptan-free formulation permits coating and patching down to -220F, for winter, refrigerator, freezer and fast-cure applications. Moisture tolerant, non-flammable, "0" VOC, non-shrink 


  Back To Top

Edison Coatings, Inc. Products are manufactured in the USA from US and foreign components.
E-NHL 2, E-NHL 3.5 White and E-NHL 5.0 are Products of France.
E-NHL 3.5 Buff and Ruregold are Products of Italy. Marfil is a Product of Spain.

 3 Northwest Drive, Plainville, CT 06062 USA

Phone: (860) 747-2220 or (800) 341-6621

FAX: (860) 747-2280 or (866) 658-1189

E-Mail: Contact Us


Last Updated:

Wednesday, June 5, 2024

Society for the Preservation of Historic Cements, Inc.


Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. All product sales are further governed by the Edison Coatings, Inc. CONDITIONS OF SALE. Privacy Policy.

Copyright 2016, Edison Coatings, Inc. All rights reserved.