Architectural Coatings

EDISON AQUATHANE UA-210 products are multi-purpose, high-performance, waterborne polyurethane- based coatings which can be applied to natural stone. They are breathing, low in odor, VOC-Compliant, fast drying, reactive, single component products. Cured films are tough, flexible, and resistant to abrasion and intermittent exposure to water and many chemicals.

Waterborne, flexible, vapor-permeable primer for Aquathane UA210 Types E and EE, promotes adhesion to contaminated, previously coated and other hard-to-bond surfaces

Primer 342 is a low viscosity, vapor permeable acrylic emulsion primer. It is used for penetrating and conditioning porous or friable surfaces prior to coating with Elastowall 351 breathable masonry coatings. It has also been used as a pre-treatment for aiding in the drying out of deeply saturated, thick section concrete and masonry structures. It has also been used as a surface conditioner and additive for durable limewash.

350-Series Products are permanently flexible breathable masonry coatings and sealants designed to waterproof and decorate vertical and sloped above-grade surfaces, including walls exhibiting small working cracks. They have high vapor permeability, retainh flexibility at low temperatures, and can be applied over a wide variety of previous coatings and treatments.

LiquiDirt 94 is a durable semi-transparent stain. It may be applied unevenly to new masonry, masonry repairs or existing surfaces to produce a weathered appearance. It may also be applied uniformly to aid in matching of new materials to old.

Spray Blok 40 is a strippable / sacrificial coating for use as a sacrificial anti-graffiti treatment, liquid masking agent or temporary, removable coating. It is characterized by high solvent resistance and ready redispersion in hot water. It is available in translucent and pigmented forms.

AQUA-SPEX 220 is a specialty coating system designed to provide multi-color finishes in a single, simple application. They are based on clear, high-performance, highly durable, water-borne polyurethane coatings into which color specks of varying sizes and colors have been dispersed. The coating can be used to simulate multi-colored granite and marble.

EXPO 43 is a latex-modified cement-based coating designed for use in thin-section decoration, texturing and weatherproofing applications. This material provides aesthetically pleasing surfaces for building finishes, masonry coating, stucco and patching.

Edison SYSTEM 90-Series sealers are reactive treatments designed for maximum performance and exterior durability in protection of on-grade and above-grade stone, concrete and masonry. Surfaces treated with SYSTEM 90 products are sealed against a wide range of chemical and weather exposures, including acid rain, melting snow, freeze-thaw, de-icing salts, air pollutants, wind driven rain and a variety of other materials.Pigmented treatments combine all the performance of 90-Series sealers with the aesthetic benefits of a durable semi-transparent stain.

EverKote 300 coatings are waterborne inorganic paints and stains based on potassium silicate binders. Potassium silicate masonry paints have been in use for over a century to provide extremely durable, breathable color coatings on all types of mineral based substrates, including stone, masonry, concrete and cement plaster (stucco). Two standard grades are available: Penetral Low Viscosity, SemiTransparent Stains and Patinar Medium Viscosity, Opaque Coatings.

CEM-PLAST 54 is a series of pre-colored, prepackaged cement plasters for use in new construction and restoration. They are formulated in accordance with ASTM C 926 specifications to provide consistent, reliable results in both performance and appearance.

Natural cement was the binder of choice in North America for large scale masonry and concrete construction during the 19th and early 20th century. Now this authentic technology is back in production and is available exclusively from Edison Coatings, Inc. Products available include Natural Cement 10C, Injection Grouts 11G and 11Gi, Masonry Mortars 12M, Patching Compounds 13P, Stuccos 14S, Whitewash 15W, Concrete 16B, Hydraulic/Lime 17L. All can be customized for particular projects.