Terra Cotta Repair
Products for patching, reglazing and repair of cracks in architectural terra cotta.
THIN-FILL 55 is a latex-modified reprofiling mortar for application of thin-section patches of 1/32 to 1/4 inch depth while maintaining excellent adhesion, strength, breathability and resistance to cracking. THIN-FILL 55 provides smooth finishes which can also be further polished to repair glazed terra cotta, smooth poured concrete or polished stone profiles. It can also be tooled after set to reproduce fluted profiles.
EDISON AQUATHANE UA-210 products are multi-purpose, high-performance, waterborne polyurethane- based coatings which can be applied to natural stone. They are breathing, low in odor, VOC-Compliant, fast drying, reactive, single component products. Cured films are tough, flexible, and resistant to abrasion and intermittent exposure to water and many chemicals.
SIL-QUATHANE 222 is a water-borne, high-performance silicone/aliphatic polyurethane hybrid elastomeric coating. It combines the extreme water resistance and reduction in water absorption rate of high-performance silicone elastomer with the abrasion, chemical, and weather resistances of aliphatic polyurethane.
AQRYL-X 200 is a high performance, very-low VOC coating designed to provide exceptional water-resistance, vapor permeability and maximum durability. AQRYL-X 200 develops high bond strength to a wide variety of substrates under dry and damp conditions, and retains high performance even after extended moisture exposures.
AQUA-SPEX 220 is a specialty coating system designed to provide multi-color finishes in a single, simple application. They are based on clear, high-performance, highly durable, water-borne polyurethane coatings into which color specks of varying sizes and colors have been dispersed. The coating can be used to simulate multi-colored granite and marble.
350-Series Products are permanently flexible breathable masonry coatings and sealants designed to waterproof and decorate vertical and sloped above-grade surfaces, including walls exhibiting small working cracks. They have high vapor permeability, retainh flexibility at low temperatures, and can be applied over a wide variety of previous coatings and treatments.
FLEXI-FILL 530 is a unique two-component, slightly flexibilized 100% solids epoxy-acrylate-isocyanate terpolymer adhesive for surface-sealing cracks and filling small depressions in a wide variety of substrates. Suitable substrates include terra cotta, concrete, masonry and stone. FLEXI-FILL 530 is a paste adhesive, which should be used neat or mixed with coarse fillers and tooled onto bonding surfaces. Although it is packaged in premeasured "A" (Resin) and "B" (Hardener) components, the mix ratio is far less critical than for traditional 2-part epoxy formulations. This allows the user to adjust working consistency at different temperatures. This variable ratio feature makes FLEXI-FILL 530 a true "all season" epoxy adhesive and sealant.
PUMP-X53 is a multi-purpose, low modulus, moderate strength filler used for filling cavities, voids and cracks from a minimum of ¼" width up to approximately 18 inches. PUMP-X53i is an ultra-fine, moderate strength micro-injection grout which achieves high flow for efficient filling of small cracks and voids from a minimum width of approximately 1 mm to as much as several inches in thickness. Pump-X 53iE is an ultra-fine, expanding, non-polymer cementitious injection grout designed for filling small cracks and voids in sound concrete and masonry construction. Slight expansion after placement and before final set enables the material to force itself into close, positive contact with internal crack surfaces, where desired. PUMP-X-53iL is a softer, non-polymer, hydraulic lime grout, for use in Historic masonry restorations requiring repairs to lower strength brick and softer stone elements.
Liquid Color Paks, produced in the same base as the product to be tinted, can be used for field tinting, adjustment or matching of colors. Tint strength of each color pack is moderated to make field tinting as user-friendly as possible. Select product base under "Options".