Concrete Repair

Systems for patching, leveling, resurfacing and grouting for structural and architectural concrete.


System 44

System 44 Concrete Repair Mortars

Edison SYSTEM 44-Series patching compounds are one-component, cement-based mortars designed for effective and economical repairs to all types of concrete structures. The series includes a wide range of formulations, each engineered for maximum performance and workability under a particular set of service and application conditions.

More Info & Pricing



Custom 45

Custom System 45

Custom SYSTEM 45 products are color-matched cement-based patching compounds used to produce highly durable and compatible aesthetic repairs to natural stone and masonry.

More Info & Pricing



DeckTop 47

Deck Top 47, 47-RC

DECK-TOP 47 and 47-RC are two-part, latex modified, concrete patching and resurfacing compounds designed for high-performance in both deep repairs and thin-section topping applications. DECK-TOP applications of 1/8" to ¼" thickness withstand heavy vehicular traffic, impact and vibration without loss of adhesion or rapid wear. Available in Standard Grey or a wide variety of custom colors.

More Info & Pricing



Level x52

Level-X52

LEVEL-X 52 is a one part, cement-based, polymer modified floor topping and leveling compound designed to provide smooth and level interior or exterior floors and decks with a minimum of time and labor. LEVEL-X 52 can be used to prepare a wide variety of sub-floors for installation of tile, carpet, resilient flooring, wood flooring and many types of surface coatings. It may also be left exposed as a final finish in light industrial or commercial environments. LEVEL-X 52 also provides rapid, economical casting, repair and leveling in exterior exposures and in wet environments. It readily accepts a variety of finishes, or may be left exposed to traffic and weather.

 

More Info & Pricing



System 49

System 49 CPBA

SYSTEM 49-CPBA is a latex-modified cement primer and bonding agent designed to protect steel reinforcement from corrosion while promoting adhesion between patching compounds and concrete and steel substrates. It is an odorless, non-flammable, waterborne system which is essentially non-hazardous in storage and handling.

More Info & Pricing



Thinfill55-20LB

THIN-FILL 55 Reprofiling Mortar

THIN-FILL 55 is a latex-modified reprofiling mortar for application of thin-section patches of 1/32 to 1/4 inch depth while maintaining excellent adhesion, strength, breathability and resistance to cracking. THIN-FILL 55 provides smooth finishes which can also be further polished to repair glazed terra cotta, smooth poured concrete or polished stone profiles. It can also be tooled after set to reproduce fluted profiles.

More Info & Pricing



Expo 43-comp1

EXPO 43 Cement-Based Coating

EXPO 43 is a polymer-modified cement-based coating designed for use in thin-section decoration, texturing and weatherproofing applications. This material provides aesthetically pleasing surfaces for building finishes, masonry coating, stucco and patching.

More Info & Pricing



RL

Restoration Latex RL 1-7

RL-Series Restoration Latexes RL-1, RL-2, RL-3, RL-4, RL-5, RL-6, RL-7 latex-modifiers are unique, reactive acrylic additives designed to enhance the performance of Portland cement-based materials. When added to cement-based mortars, patches, plasters and coatings, RL-Series latex modifiers improve mechanical performance, workability, adhesion and resistance to harsh environmental exposures.

More Info & Pricing



Rosendale

Rosendale Natural Cement Products (R)

Natural cement was the binder of choice in North America for large scale masonry and concrete construction during the 19th and early 20th century. Now this authentic technology is back in production and is available from Edison Coatings, Inc.

Products available include:
     Rosendale 10C Natural Cement
     Rosendale 11G and 11Gi Injection Grouts
     Rosendale 12M Masonry Mortars
     Rosendale 13P Patching Compounds 
     Rosendale 14S Stuccos 
     Rosendale 15W Whitewash
     Rosendale 16B Concrete/Beton

All can be customized for particular projects.

More Info & Pricing



Flexi-Bond 540

Flexi-Bond 540

FLEXI-BOND 540 is a two component, 100% solids, moisture-insensitive epoxy bonding agent. Application of FLEXI-BOND 540 to wet or dry, properly prepared substrates assures tenacious adhesion of new toppings, patching compounds and tile bedding mortars when used in accordance with instructions. It may also be applied to steel, tile, wood and fiberglass. It can be used as a combination waterproof barrier and bonding agent when applying new concrete toppings over old concrete. It can be used to improve adhesion of tile bedding mortars to existing concrete, or may be used directly for tile bedding in combination with very fine sand. It can be used to prime and waterproof steel reinforcement prior t application of patching compounds or concrete pouring while improving adhesion of these materials. It can be used to penetrate and consolidate low strength floors, such as asbestos-cement or cinder concrete, and to improve adhesion of new toppings or patching compounds to same. It can be used to promote adhesion of concrete, bedding mortars or toppings to non-cementitious substrate, such as tile, plywood decking, or steel plate.

More Info & Pricing



Flexi-Top 550

Flexi-Top 550, 555

FLEXI-TOP 550 & 555 are heavy-duty, 100% solids, odorless epoxy mortars far patching and topping of commercial, institutional and industrial floors. FLEXI-TOP 550 is a self-leveling surfacing system providing heavy-duty protection at l/8" to 1/4" thickness or more. Blended with select aggregates, it forms a fluid mixture which easily spreads with a V-notched trowel or squeegee. Upon curing, it forms a dense, non-porous flooring that resists chemical and water penetration, dirt pick-up, and heavy traffic. It may be sealed with a number of protective topcoats for improved skid resistance, gloss and color retention. FLEXI-TOP 555 is a versatile trowel-applied mortar used for patching or toppings of 1/4" or more. Blended with specially graded aggregates, it forms a dry, trowelable mortar that can be applied by hand or power trowel. This mortar is then grouted and sealed with 100% solids resins to eliminate porosity and produce a dense, non-porous, slip-resistant finish.

More Info & Pricing



Flashepoxy 580

Flashepoxy 580 Hi Speed/Lo Temp Epoxy

FLASHEPOXY 580-Series Ultra-Fast & Low Temperature Adhesives / Acrylate-Epoxies are 100% solids, low odor/toxicity, mercaptan-free formulation permits coating and patching down to -220F, for winter, refrigerator, freezer and fast-cure applications. Moisture tolerant, non-flammable, "0" VOC, non-shrink

More Info & Pricing



Flexi-Matrix 545

Flexi-Matrix 545 Epoxy Concrete

FLEXI-MATRIX 545 is a two component, 100% solids, moisture-insensitive epoxy used for making high-strength chemical resistant polymer concrete. FLEXI-MATRIX 545 may be used under wet or dry conditions, or even underwater, to provide durable, high-strength toppings, patches, floors, walls or other structural elements, when used in accordance with the instructions. It may be applied over concrete, steel, tile, wood, and fiberglass.

More Info & Pricing



System 22

System 22 Set Retarder

System 22 HC is a ready-to use set retarder for cement-based materials. It can aid in exposing aggregate in concrete, cement plaster, mortars, and patching compounds, by spraying on the surface. It can also increase set times and working times in cement based materials, by direct addition to the mix.

More Info & Pricing



bag.jpg

LMC 56

LMC 56 is a prepackaged concrete mix designed for use in Latex-Modified Concrete toppings and repairs. Mixed with an FHWA-approved latex modifier, LMC 56 will meet typical DOT performance and composition specifications for bridge deck, railroad platform and parking deck and ramp toppings.

More Info & Pricing



ICE -9

ICE MINUS 9 FTR (RL-9)

Provided in ready-to-use concentration.

ICE MINUS 9 is a reactive proprietary additive that imparts superior freeze-thaw and salt-scaling resistance to mortars, plasters and concretes. In addition, it improves bond strength and flexibility while reducing shrinkage. Provided in ready-to-use concentration, it is simply used in place of mixing water to produce workable mixtures.

More Info & Pricing